100mm Jablite EWI 70HPE Plus 1200mm x 600mm (Pack of 6)
Free Delivery Over £750+vat
Maximise Your Building's Efficiency with Jablite External Wall Insulation (EWI) HP+
Key Benefits:
- Low thermal conductivity (Lambda from 0.030W/mK)
- 100% recyclable with off-cut collection service
- Lightweight and easy to handle, flood-proof, and durable
- Achieves high-quality rendered surfaces, ensuring long-term insulation for buildings
- Achieves Fire Class E rating
Type: Jablite EWI HP+ is available in two variants: EPS 70 E (white) and EPS HP 70 E (grey), meeting BS EN 13163 standards. All our EWI contain flame retardant additives to achieve Reaction to Fire Class E. For rendering applications, aged material is recommended.
Easy Installation: Crafted from lightweight expanded polystyrene (EPS), Jablite EWI HP+ is simple to handle and install. Its user-friendly design eliminates the need for specialised trades or equipment, minimising disruption during installation.
Environmental Impact: With an A+ rating from the BRE’s Green Guide to Specification, EPS ensures sustainable construction practices, reducing environmental footprint.
Long-lasting Performance: Jablite EWI HP+ is rot-proof and durable, ensuring effectiveness throughout the building's lifespan. Recommended fixing methods ensure permanent board retention, with the added benefit of flood-proof properties.
Fire and Water Resistance: While offering significant water vapour resistance, Jablite EWI HP+ should not be considered a vapour-control layer. Condensation calculations indicate the ideal dew point occurrence on the external face of the insulation.
Versatile Applications: Manufactured from EPS, Jablite EWI HP+ can be bonded or mechanically fixed to external walls, suitable for various render and cladding systems, including timber or plastic weatherboarding, tile hanging, and reinforced-render systems.
Product Specifications:
- Thickness: 100mm
- Length: 1200mm
- Width: 600mm
- Sheets per Pack: 6
- Sheet coverage: 0.72m²
- Thermal conductivity: 0.030 W/mK
Note:
Due to the nature of polystyrene products, there may be small edge damage when these types of products are delivered. This is usually unavoidable during transportation and should not affect the performance of these products when installed correctly.
Data Sheet
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.
Maximise Your Building's Efficiency with Jablite External Wall Insulation (EWI) HP+
Key Benefits:
- Low thermal conductivity (Lambda from 0.030W/mK)
- 100% recyclable with off-cut collection service
- Lightweight and easy to handle, flood-proof, and durable
- Achieves high-quality rendered surfaces, ensuring long-term insulation for buildings
- Achieves Fire Class E rating
Type: Jablite EWI HP+ is available in two variants: EPS 70 E (white) and EPS HP 70 E (grey), meeting BS EN 13163 standards. All our EWI contain flame retardant additives to achieve Reaction to Fire Class E. For rendering applications, aged material is recommended.
Easy Installation: Crafted from lightweight expanded polystyrene (EPS), Jablite EWI HP+ is simple to handle and install. Its user-friendly design eliminates the need for specialised trades or equipment, minimising disruption during installation.
Environmental Impact: With an A+ rating from the BRE’s Green Guide to Specification, EPS ensures sustainable construction practices, reducing environmental footprint.
Long-lasting Performance: Jablite EWI HP+ is rot-proof and durable, ensuring effectiveness throughout the building's lifespan. Recommended fixing methods ensure permanent board retention, with the added benefit of flood-proof properties.
Fire and Water Resistance: While offering significant water vapour resistance, Jablite EWI HP+ should not be considered a vapour-control layer. Condensation calculations indicate the ideal dew point occurrence on the external face of the insulation.
Versatile Applications: Manufactured from EPS, Jablite EWI HP+ can be bonded or mechanically fixed to external walls, suitable for various render and cladding systems, including timber or plastic weatherboarding, tile hanging, and reinforced-render systems.
Product Specifications:
- Thickness: 100mm
- Length: 1200mm
- Width: 600mm
- Sheets per Pack: 6
- Sheet coverage: 0.72m²
- Thermal conductivity: 0.030 W/mK
Note:
Due to the nature of polystyrene products, there may be small edge damage when these types of products are delivered. This is usually unavoidable during transportation and should not affect the performance of these products when installed correctly.
Data Sheet
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.
including insulation board and plasterboard