Nationwide delivery

Nationwide delivery

Nationwide delivery

Specialist advice

Nationwide delivery

Best practices

Nationwide delivery

Secure checkout

Loading...

10mm Regupol Sonus Core 10-S 10mx1250mm (6010SH)

£353.99 £294.99
Product code:
CDRESOC10
Brand:
Regupol
Shopping Truck

3 -5 working days

Shipping costs displayed in basket

-
+
Ask a question about this product
Product Information
Data Sheets
Delivery Information
Reviews

REGUPOL SONUS CORE 10-S, formerly known as REGUPOL 6010 SH, is a sustainable and high-performing screed isolation solution made from recycled crumb materials. It is specifically designed for heavy load bearing areas where acoustic performance is critical.

 

The product delivers the greatest load bearing capacity in the CMS Danskin Acoustics underscreed range, while meeting the requirements of Approved Document E (England & Wales), Technical Booklet G (Northern Ireland), and Section 5 of the Building Regulations (Scotland).

 

Some of the key features and benefits of REGUPOL SONUS CORE 10-S include excellent impact and airborne performance, long-term performance without collapse or "bottoming" out under high point loads, resistance to aging and deformation, quick and easy installation, guaranteed high quality and exact material thickness, and resistance to mildew and moisture. Additionally, the product is manufactured using recycled materials and is 100% recyclable, and the manufacturing facility is certified to ISO 9001, ISO 45001, ISO 14001, and ISO 50001 standards.

Application & Installation

  • Installation
  • Installation steps for Regupol 6010 SH (REGUPOL sonus core 10-S and REGUPOL sonus core 15-S) Acoustic Screed Isolation Material:
    • Prepare the base floor by ensuring it is clean, flat (within National Building standards +/-5mm over a 5m span) and as dry as possible.
    • Unroll the Regupol and leave it for a few hours before measuring or cutting to length. The product may stretch slightly when rolled up.
    • Install the Regupol 6010SH (REGUPOL sonus core 10-S and REGUPOL sonus core 15-S) perimeter strips first, butted against the perimeter walls. These strips can be cut on site using a sharp knife and straight edge, or pre-cut strips can be ordered. The perimeter strips should be at least 10mm above the finished screed, and excess material can be trimmed after the screed has set.
    • Lay the Regupol 6010 SH (REGUPOL sonus core 10-S and REGUPOL sonus core 15-S) Acoustic Screed Isolation Material, using a sharp knife and straight edge for cutting to size.

  

Properties
Thickness: 10mm
Length: 10m
Width: 1250mm
Weight: 73.5kg

 

 

Regupol Sonus Core (6010SH) is also available in the following:
Product Link to product
15-S (15mm) Click here

Data Sheet

Installation Guide

For delivery information, please refer to our delivery policy page.

Write Your Own Review
You're reviewing:10mm Regupol Sonus Core 10-S 10mx1250mm (6010SH)
Product Information

REGUPOL SONUS CORE 10-S, formerly known as REGUPOL 6010 SH, is a sustainable and high-performing screed isolation solution made from recycled crumb materials. It is specifically designed for heavy load bearing areas where acoustic performance is critical.

 

The product delivers the greatest load bearing capacity in the CMS Danskin Acoustics underscreed range, while meeting the requirements of Approved Document E (England & Wales), Technical Booklet G (Northern Ireland), and Section 5 of the Building Regulations (Scotland).

 

Some of the key features and benefits of REGUPOL SONUS CORE 10-S include excellent impact and airborne performance, long-term performance without collapse or "bottoming" out under high point loads, resistance to aging and deformation, quick and easy installation, guaranteed high quality and exact material thickness, and resistance to mildew and moisture. Additionally, the product is manufactured using recycled materials and is 100% recyclable, and the manufacturing facility is certified to ISO 9001, ISO 45001, ISO 14001, and ISO 50001 standards.

Application & Installation

  • Installation
  • Installation steps for Regupol 6010 SH (REGUPOL sonus core 10-S and REGUPOL sonus core 15-S) Acoustic Screed Isolation Material:
    • Prepare the base floor by ensuring it is clean, flat (within National Building standards +/-5mm over a 5m span) and as dry as possible.
    • Unroll the Regupol and leave it for a few hours before measuring or cutting to length. The product may stretch slightly when rolled up.
    • Install the Regupol 6010SH (REGUPOL sonus core 10-S and REGUPOL sonus core 15-S) perimeter strips first, butted against the perimeter walls. These strips can be cut on site using a sharp knife and straight edge, or pre-cut strips can be ordered. The perimeter strips should be at least 10mm above the finished screed, and excess material can be trimmed after the screed has set.
    • Lay the Regupol 6010 SH (REGUPOL sonus core 10-S and REGUPOL sonus core 15-S) Acoustic Screed Isolation Material, using a sharp knife and straight edge for cutting to size.

  

Properties
Thickness: 10mm
Length: 10m
Width: 1250mm
Weight: 73.5kg

 

 

Regupol Sonus Core (6010SH) is also available in the following:
Product Link to product
15-S (15mm) Click here
Data Sheets

Data Sheet

Installation Guide

Delivery Information

For delivery information, please refer to our delivery policy page.

Reviews
Write Your Own Review
You're reviewing:10mm Regupol Sonus Core 10-S 10mx1250mm (6010SH)
 

Have a question about this product?