Nationwide delivery

Nationwide delivery

Nationwide delivery

Specialist advice

Nationwide delivery

Best practices

Nationwide delivery

Secure checkout

Loading...

15mm Karma Easypanel (Floors) 1200x800mm

£35.47 £29.56
Product code:
CDKAE15
Brand:
Karma
Shopping Truck

3 -5 working days

Shipping costs displayed in basket

-
+
15mm Karma Easypanel (Floors) 1200x800mm is available to buy in increments of 1
Ask a question about this product
Product Information
Data Sheets
Delivery Information
Reviews

Karma Easypanel, overlaid with an 18mm chipboard, is a top-performing floor panel that contains dry silica sand to achieve outstanding acoustic results. The addition of mass to lightweight structures offers both airborne and impact soundproofing benefits in a single product. Despite using standard building materials, this slimline solution provides high performance with minimal cost implications. Moreover, Karma Easypanel can also be applied to walls or ceilings. This acoustic system is suitable for use on timber, steel, or solid concrete substrates in new builds, conversions, refurbishments, and remedial projects.

 

Application & Installation

Timber Separating Floors:

  1. The entire floor and ceiling structure is responsible for the direct transmission of sound through the separating floor. For floor treatment, Karma Acoustic Easypanel is the floating resilient layer which has exceptional Airborne and Impact sound reduction values. However, if care and attention to detail are not carried out to a high standard, the overall performance will be affected.
  2. Flanking walls (walls connected to the separating floor) can carry both Airborne and Impact sounds to the room above or below, so it is therefore imperative that no additional hard finishing surface touches against these surrounding walls. For additional acoustic treatment of flanking and separating walls, see our fitting instructions for Soundproofing Walls. However, it is imperative that Karma Acoustic Easypanel sound insulation board is butted up tightly to surrounding walls.
  3. Where a wet trade is following the fitting of exposed Karma Acoustic EasyPanel, a temporary, peel clean, protective surface should be laid.
  4. It is the fitter’s responsibility to ensure all materials are safely and securely held.

Concrete Separating Floors:

  1. The entire floor and ceiling structure is responsible for the direct transmission of sound through the separating floor. For floor treatment, Karma Acoustic EasyPanel is the floating resilient layer which has exceptional Airborne and Impact sound reduction values. However, if care and attention to detail are not carried out to a high standard, the overall performance will be affected. It is the fitter’s responsibility to ensure all materials are safely and securely held.
  2. Flanking walls (walls connected to the separating floor) can carry both Airborne and Impact sounds to the room above or below so it is therefore imperative that no additional hard finishing surface touches against these surrounding walls. For additional acoustic treatment of flanking and separating walls, see our fitting instructions for Soundproofing Walls. However, it is imperative that Karma Acoustic EasyPanel sound insulation board is butted up tightly to surrounding walls.
  3. Where a wet trade is following the fitting of exposed Karma Acoustic EasyPanel, a temporary, peel clean, protective surface should be laid.

 

  

Properties
Thickness: 15mm
Length: 1200mm
Width: 800mm
Weight: 18kg/m²

 

Karma Easypanel 1200x800mm is also available in the following:
Product: Link to product:
Easypanel (Walls) Click here

 

 

 

Data Sheet

For delivery information, please refer to our delivery policy page.

Write Your Own Review
You're reviewing:15mm Karma Easypanel (Floors) 1200x800mm
Product Information

Karma Easypanel, overlaid with an 18mm chipboard, is a top-performing floor panel that contains dry silica sand to achieve outstanding acoustic results. The addition of mass to lightweight structures offers both airborne and impact soundproofing benefits in a single product. Despite using standard building materials, this slimline solution provides high performance with minimal cost implications. Moreover, Karma Easypanel can also be applied to walls or ceilings. This acoustic system is suitable for use on timber, steel, or solid concrete substrates in new builds, conversions, refurbishments, and remedial projects.

 

Application & Installation

Timber Separating Floors:

  1. The entire floor and ceiling structure is responsible for the direct transmission of sound through the separating floor. For floor treatment, Karma Acoustic Easypanel is the floating resilient layer which has exceptional Airborne and Impact sound reduction values. However, if care and attention to detail are not carried out to a high standard, the overall performance will be affected.
  2. Flanking walls (walls connected to the separating floor) can carry both Airborne and Impact sounds to the room above or below, so it is therefore imperative that no additional hard finishing surface touches against these surrounding walls. For additional acoustic treatment of flanking and separating walls, see our fitting instructions for Soundproofing Walls. However, it is imperative that Karma Acoustic Easypanel sound insulation board is butted up tightly to surrounding walls.
  3. Where a wet trade is following the fitting of exposed Karma Acoustic EasyPanel, a temporary, peel clean, protective surface should be laid.
  4. It is the fitter’s responsibility to ensure all materials are safely and securely held.

Concrete Separating Floors:

  1. The entire floor and ceiling structure is responsible for the direct transmission of sound through the separating floor. For floor treatment, Karma Acoustic EasyPanel is the floating resilient layer which has exceptional Airborne and Impact sound reduction values. However, if care and attention to detail are not carried out to a high standard, the overall performance will be affected. It is the fitter’s responsibility to ensure all materials are safely and securely held.
  2. Flanking walls (walls connected to the separating floor) can carry both Airborne and Impact sounds to the room above or below so it is therefore imperative that no additional hard finishing surface touches against these surrounding walls. For additional acoustic treatment of flanking and separating walls, see our fitting instructions for Soundproofing Walls. However, it is imperative that Karma Acoustic EasyPanel sound insulation board is butted up tightly to surrounding walls.
  3. Where a wet trade is following the fitting of exposed Karma Acoustic EasyPanel, a temporary, peel clean, protective surface should be laid.

 

  

Properties
Thickness: 15mm
Length: 1200mm
Width: 800mm
Weight: 18kg/m²

 

Karma Easypanel 1200x800mm is also available in the following:
Product: Link to product:
Easypanel (Walls) Click here

 

 

 

Data Sheets

Data Sheet

Delivery Information

For delivery information, please refer to our delivery policy page.

Reviews
Write Your Own Review
You're reviewing:15mm Karma Easypanel (Floors) 1200x800mm
 

Have a question about this product?