Nationwide delivery

Nationwide delivery

Nationwide delivery

Specialist advice

Nationwide delivery

Best practices

Nationwide delivery

Secure checkout

Loading...

30mm Karma Acoustiwall 1200x1200mm

£59.99 £49.99
Product code:
CDKAA30
Brand:
Karma
Shopping Truck

3 -5 working days

Shipping costs displayed in basket

-
+
Ask a question about this product
Product Information
Data Sheets
Delivery Information
Reviews

The Karma Acoustiwall 30mm Acoustic Wall Lining System effectively reduces airborne sound transmission through masonry walls and can be directly installed onto the wall without the use of timber battens or resilient bars. It is designed mainly for renovating existing masonry walls that will serve as a party or separating walls between dwellings. This system is particularly beneficial in spaces where existing properties have limited room or in new properties where lightweight blocks have been used.

 

Application & Installation

  • The roof of the building and the windows must be in place prior to the installation of Karma Acoustiwall Lining System.
  • Remove existing skirting, cornice/coving, sockets, or switches. Ensure the top surface of the wall is flat and free of debris.
  • Offer up to the wall the Karma Acoustiwall panel, pink side facing out to ensure a flat and stable position.
  • Support the Karma Acoustiwall panel firmly against the wall whilst drilling 5x no. M6 holes, through the panel and into the block/brick wall, 200mm in and down from each corner and 1no. to the centre.
  • Using a hammer, insert the 5no. M6 x 65mm Metal Nailin fixings through the panel into the block/brick behind to a depth where the head of the fixing slightly indents into the pink board flush with the surface.
  • Continue installing the Karma Acoustiwall panels in a brick fashion until the separating/party wall in completely covered ensuring minimal spaces/gaps between the abutted joints.
  • Apply the acoustic/fire mastic to all abutted joints and perimeter joints between floors, walls and ceilings.
  • Apply jointing tape to all board joints, apply finishing plaster ready for decoration.
  • Electrical Sockets/Switches: In areas which contain electrical sockets/switches ensure cables are brought through to the front of the Karma Acoustiwall panel using a minimal whole. Using the Acoustic/Fire mastic seal the whole around the cable, install suitable electrical boxes for plasterboard walls, install Karma Acoustic/Fire Putty Pads to the boxes, connect cables and affix switch/socket face plate.
  • Cornice/Coving: Install cornice/coving in the usual manner according to manufacturer’s instruction.
  • Skirting Boards: Install skirting in the usual manner used with plasterboard partitions and according to manufacturer’s instruction.

 

  

Properties
Thickness: 30mm
Length: 1200mm
Width: 1200mm
Coverage: 1.44m²
Weight: 28.8kg

Data Sheet

For delivery information, please refer to our delivery policy page.

Write Your Own Review
You're reviewing:30mm Karma Acoustiwall 1200x1200mm
Product Information

The Karma Acoustiwall 30mm Acoustic Wall Lining System effectively reduces airborne sound transmission through masonry walls and can be directly installed onto the wall without the use of timber battens or resilient bars. It is designed mainly for renovating existing masonry walls that will serve as a party or separating walls between dwellings. This system is particularly beneficial in spaces where existing properties have limited room or in new properties where lightweight blocks have been used.

 

Application & Installation

  • The roof of the building and the windows must be in place prior to the installation of Karma Acoustiwall Lining System.
  • Remove existing skirting, cornice/coving, sockets, or switches. Ensure the top surface of the wall is flat and free of debris.
  • Offer up to the wall the Karma Acoustiwall panel, pink side facing out to ensure a flat and stable position.
  • Support the Karma Acoustiwall panel firmly against the wall whilst drilling 5x no. M6 holes, through the panel and into the block/brick wall, 200mm in and down from each corner and 1no. to the centre.
  • Using a hammer, insert the 5no. M6 x 65mm Metal Nailin fixings through the panel into the block/brick behind to a depth where the head of the fixing slightly indents into the pink board flush with the surface.
  • Continue installing the Karma Acoustiwall panels in a brick fashion until the separating/party wall in completely covered ensuring minimal spaces/gaps between the abutted joints.
  • Apply the acoustic/fire mastic to all abutted joints and perimeter joints between floors, walls and ceilings.
  • Apply jointing tape to all board joints, apply finishing plaster ready for decoration.
  • Electrical Sockets/Switches: In areas which contain electrical sockets/switches ensure cables are brought through to the front of the Karma Acoustiwall panel using a minimal whole. Using the Acoustic/Fire mastic seal the whole around the cable, install suitable electrical boxes for plasterboard walls, install Karma Acoustic/Fire Putty Pads to the boxes, connect cables and affix switch/socket face plate.
  • Cornice/Coving: Install cornice/coving in the usual manner according to manufacturer’s instruction.
  • Skirting Boards: Install skirting in the usual manner used with plasterboard partitions and according to manufacturer’s instruction.

 

  

Properties
Thickness: 30mm
Length: 1200mm
Width: 1200mm
Coverage: 1.44m²
Weight: 28.8kg
Data Sheets

Data Sheet

Delivery Information

For delivery information, please refer to our delivery policy page.

Reviews
Write Your Own Review
You're reviewing:30mm Karma Acoustiwall 1200x1200mm
 

Have a question about this product?