Loading...

Isomass Isocheck Acoustic Shallow Batten 1800 x 45 x 45mm

Product code:
IMICSB
POA
Isomass Isocheck Acoustic Shallow Batten 1800 x 45 x 45mm is available to buy in increments of 1
View product details
Ask a question about this product
Delivery:

3 -5 working days


Shipping costs displayed in basket
Product Information
Data Sheets
Delivery Information
Reviews

The Isocheck Shallow Batten system is designed to reduce sound transmission through a concrete structural sub-floor.

Isocheck Shallow Batten consists of a layer of 10mm or 15mm ACF (Acoustic Chip Foam) bonded to a FSC-certified softwood batten. Should the requirement be for a batten height other than that specified on this page please contact us for further technical advice and suitability. May be installed in conjunction with underfloor heating systems.

When installed as part of a complete party floor construction it enables a concrete floor to meet the sound transmission standards of ADE 2003 and subsequent amendments in 2004, 2010, 2013 and 2015.

 

Application & Installation

  • To be used over level concrete floors for new build projects, refurbishments and conversions.
  • Lay Isocheck Shallow Batten resilient layer side down, at 400mm max. centres for 18mm chipboard flooring or 500mm max. centres for 22mm chipboard flooring.
  • Apply Isocheck Acoustic Angled Flanking Band on the edges of the chipboard just before they are pushed against the perimeter walls to isolate the board from the wall.
  • Apply Isocheck adhesive to all tongued and grooved panel joints.
  • Install skirting and trim off excess Flanking Band.
  • Full installation instructions are available and must be used in conjunction when laying this floating floor system.

  

Properties
Thickness: 45mm
Length: 1800mm
Width: 45m
Resilient layer thickness: 15mm ACF Type 2; 10mm ACF Type 3
Resilient layer: ACF (Acoustic Chip Foam)

 

Isomass Isocheck Acoustic Batten 1800x45mm is also available in the following sizes:
Products: Link to products:
Deep Batten (75mm) Click here

 

 

 

Data Sheet

 

Installation Guide

Delivery Information & Instructions

Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.

To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.

Key Points to Note:

  1. Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
  2. Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
  3. Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.

Delivery Time and Order Confirmation

At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:

  • Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
  • Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
  • Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
  • Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
  • Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
  • Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
  • Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
  • Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
  • Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
  • Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
  • Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.

For more in-depth delivery information, please refer to our delivery policy page.

Write Your Own Review
You're reviewing:Isomass Isocheck Acoustic Shallow Batten 1800 x 45 x 45mm
Product Information

The Isocheck Shallow Batten system is designed to reduce sound transmission through a concrete structural sub-floor.

Isocheck Shallow Batten consists of a layer of 10mm or 15mm ACF (Acoustic Chip Foam) bonded to a FSC-certified softwood batten. Should the requirement be for a batten height other than that specified on this page please contact us for further technical advice and suitability. May be installed in conjunction with underfloor heating systems.

When installed as part of a complete party floor construction it enables a concrete floor to meet the sound transmission standards of ADE 2003 and subsequent amendments in 2004, 2010, 2013 and 2015.

 

Application & Installation

  • To be used over level concrete floors for new build projects, refurbishments and conversions.
  • Lay Isocheck Shallow Batten resilient layer side down, at 400mm max. centres for 18mm chipboard flooring or 500mm max. centres for 22mm chipboard flooring.
  • Apply Isocheck Acoustic Angled Flanking Band on the edges of the chipboard just before they are pushed against the perimeter walls to isolate the board from the wall.
  • Apply Isocheck adhesive to all tongued and grooved panel joints.
  • Install skirting and trim off excess Flanking Band.
  • Full installation instructions are available and must be used in conjunction when laying this floating floor system.

  

Properties
Thickness: 45mm
Length: 1800mm
Width: 45m
Resilient layer thickness: 15mm ACF Type 2; 10mm ACF Type 3
Resilient layer: ACF (Acoustic Chip Foam)

 

Isomass Isocheck Acoustic Batten 1800x45mm is also available in the following sizes:
Products: Link to products:
Deep Batten (75mm) Click here

 

 

Data Sheets

 

Data Sheet

 

Installation Guide

Delivery Information

Delivery Information & Instructions

Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.

To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.

Key Points to Note:

  1. Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
  2. Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
  3. Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.

Delivery Time and Order Confirmation

At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:

  • Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
  • Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
  • Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
  • Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
  • Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
  • Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
  • Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
  • Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
  • Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
  • Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
  • Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.

For more in-depth delivery information, please refer to our delivery policy page.

Reviews
Write Your Own Review
You're reviewing:Isomass Isocheck Acoustic Shallow Batten 1800 x 45 x 45mm
 

Have a question about this product?

Speak to our team
Nationwide delivery
super deals and promotions
Specialist supplier over 300 insulation products
including insulation board and plasterboard