Nationwide delivery

Nationwide delivery

Nationwide delivery

Specialist advice

Nationwide delivery

Best practices

Nationwide delivery

Secure checkout

Loading...

Isomass Isocheck Isowave 23 Acoustic Panel 1197 x 597mm

£60.00 £50.00
POA
Product code:
IMICIW23
Brand:
Isomass
Shopping Truck

3 -5 working days

Shipping costs displayed in basket

Ask a question about this product
Product Information
Data Sheets
Delivery Information
Reviews

Isowave 23 consists of a 10mm Isowave acoustic foam measured to BS 4443 and BS EN ISO 845:2009 bonded to 12.5mm high density, square edged fibre-reinforced gypsum board. Isowave 23 system incorporates acoustic foam which is semi rigid and is an excellent absorber with high damping characteristics when bonded to an acoustically reflective stiff surface. Isowave foam is manufactured using water as a blowing agent and is free of CFCs, HFCs or HCFCs. Isowave 23 acoustic ceiling system complies with requirements of EU Regulation No 2037/2000 for ozone depletion and offers good thermal properties.

The Isowave 23 acoustic wall system is for the treatment of excessive flanking sound that bypasses a separating floor via lightweight structural walls. The Isowave 23 acoustic wall system is used to enhance a wall that is found to underperform or to provide a high-performance wall commonly used in home cinemas/studios.

Also, in situations where commercial activities adjoin a dwelling or for upgrading separating walls where there is limited space. This is a versatile system used in refurbishments or new build with a decoupled ceiling

 

Application & Installation

  • To construct or upgrade separating and external walls for conversions and refurbishments.
  • Fix securely to all supports working from the centre of each board outward to the edges using the specified method of fixing at 250mm maximum centres with countersunk cross-slot screws 3.9 x 30mm positioned through the Isocheck Isoblock & Isobar system - fixed at 600mm max centres and 150mm max. from top and bottom edges or into the metal ‘I’ beam. Position fixings not less than 20mm from board edges and 50mm from corners.
  • The heads of all fixings should be sunk into the surface of the board and stopped with joint filler.
  • The square edged cement particle board should be sealed with an intumescent sealant, joints to be a maximum 1mm wide. Any excess adhesive to be removed using a spatula once the adhesive has fully hardened.
  • A 9.5mm or 12.5mm tapered edge plasterboard with all edges taped should then be fitted. Skim and lightly sand if required.
  • Where electric socket boxes and light switches are installed the back of the box should be isolated with Isocheck Impacta Pads

  

Properties
Thickness: 22.5mm
Length: 1197mm
Width: 597mm
Sheet Coverage: 0.72m²
Weight per Sheet: 12.3kg
Resilient layer: 10mm
Board Density: 1300kg/m²
Foam Density: Less than 90kg/m²

 


 

 

 

Data Sheet

 

Installation Guide

For delivery information, please refer to our delivery policy page.

Write Your Own Review
You're reviewing:Isomass Isocheck Isowave 23 Acoustic Panel 1197 x 597mm
Product Information

Isowave 23 consists of a 10mm Isowave acoustic foam measured to BS 4443 and BS EN ISO 845:2009 bonded to 12.5mm high density, square edged fibre-reinforced gypsum board. Isowave 23 system incorporates acoustic foam which is semi rigid and is an excellent absorber with high damping characteristics when bonded to an acoustically reflective stiff surface. Isowave foam is manufactured using water as a blowing agent and is free of CFCs, HFCs or HCFCs. Isowave 23 acoustic ceiling system complies with requirements of EU Regulation No 2037/2000 for ozone depletion and offers good thermal properties.

The Isowave 23 acoustic wall system is for the treatment of excessive flanking sound that bypasses a separating floor via lightweight structural walls. The Isowave 23 acoustic wall system is used to enhance a wall that is found to underperform or to provide a high-performance wall commonly used in home cinemas/studios.

Also, in situations where commercial activities adjoin a dwelling or for upgrading separating walls where there is limited space. This is a versatile system used in refurbishments or new build with a decoupled ceiling

 

Application & Installation

  • To construct or upgrade separating and external walls for conversions and refurbishments.
  • Fix securely to all supports working from the centre of each board outward to the edges using the specified method of fixing at 250mm maximum centres with countersunk cross-slot screws 3.9 x 30mm positioned through the Isocheck Isoblock & Isobar system - fixed at 600mm max centres and 150mm max. from top and bottom edges or into the metal ‘I’ beam. Position fixings not less than 20mm from board edges and 50mm from corners.
  • The heads of all fixings should be sunk into the surface of the board and stopped with joint filler.
  • The square edged cement particle board should be sealed with an intumescent sealant, joints to be a maximum 1mm wide. Any excess adhesive to be removed using a spatula once the adhesive has fully hardened.
  • A 9.5mm or 12.5mm tapered edge plasterboard with all edges taped should then be fitted. Skim and lightly sand if required.
  • Where electric socket boxes and light switches are installed the back of the box should be isolated with Isocheck Impacta Pads

  

Properties
Thickness: 22.5mm
Length: 1197mm
Width: 597mm
Sheet Coverage: 0.72m²
Weight per Sheet: 12.3kg
Resilient layer: 10mm
Board Density: 1300kg/m²
Foam Density: Less than 90kg/m²

 


 

 

Data Sheets

 

Data Sheet

 

Installation Guide

Delivery Information

For delivery information, please refer to our delivery policy page.

Reviews
Write Your Own Review
You're reviewing:Isomass Isocheck Isowave 23 Acoustic Panel 1197 x 597mm
 

Have a question about this product?