Loading...

Isomass Monodeck 30T T&G Acoustic Deck 2400 x 600 x 30mm

Product code:
IMMD30
POA
Isomass Monodeck 30T T&G Acoustic Deck 2400 x 600 x 30mm is available to buy in increments of 1
View product details
Ask a question about this product
Delivery:

3 -5 working days


Shipping costs displayed in basket
Product Information
Data Sheets
Delivery Information
Reviews

Monodeck 30T system is designed to reduce transmission through timber floors in situations where finished floor height is critical.

Monodeck 30T boards consist of a layer of 8mm reconstituted ACF bonded to 22mm V313 P5 moisture resistant chipboard. 

When installed as part of an Isomass approved separating floor construction either system enables a traditional timber joisted floor to meet the sound transmission standards of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 and 2015

 

Application & Installation

  • To be used over existing floorboards for conversions, refurbishments or new build with a new resilient bar ceiling.
  • Apply Isocheck Acoustic Angled Flanking Band on the edges of the Monodeck boards just before they are pushed against the perimeter walls to isolate the board from the wall (as shown in the diagrams).
  • Lay Monodeck over existing floorboards in broken bond pattern, applying adhesive to all tongue and grooved panel joints. Install skirting over exposed flanking band and trim off any excess.
  • Full installation instructions are available for download and must be used in conjunction when laying this floor system.

  

Properties
Thickness: 30mm
Length: 2400mm
Width: 600mm
Sheet Coverage: 1.44 m2
Weight per Sheet: 21.9 kg
Resilient layer thickness: 8mm
Resilient layer: Reconstituted ACF (Acoustic Chip Foam)
Resilient layer fire test: Tested to BS5852-2:1982

 

Isomass Monodeck T&G Acoustic Deck is also available in the following sizes:
Products Link to products:
17T 1200x600x17mm Click here
26T 2400x600x26mm Click here
32T 2400x600x32mm Click here
37T 2400x600x37mm Click here

 

 

 

Data Sheet

 

Installation Guide

Delivery Information & Instructions

Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.

To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.

Key Points to Note:

  1. Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
  2. Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
  3. Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.

Delivery Time and Order Confirmation

At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:

  • Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
  • Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
  • Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
  • Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
  • Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
  • Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
  • Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
  • Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
  • Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
  • Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
  • Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.

For more in-depth delivery information, please refer to our delivery policy page.

Write Your Own Review
You're reviewing:Isomass Monodeck 30T T&G Acoustic Deck 2400 x 600 x 30mm
Product Information

Monodeck 30T system is designed to reduce transmission through timber floors in situations where finished floor height is critical.

Monodeck 30T boards consist of a layer of 8mm reconstituted ACF bonded to 22mm V313 P5 moisture resistant chipboard. 

When installed as part of an Isomass approved separating floor construction either system enables a traditional timber joisted floor to meet the sound transmission standards of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 and 2015

 

Application & Installation

  • To be used over existing floorboards for conversions, refurbishments or new build with a new resilient bar ceiling.
  • Apply Isocheck Acoustic Angled Flanking Band on the edges of the Monodeck boards just before they are pushed against the perimeter walls to isolate the board from the wall (as shown in the diagrams).
  • Lay Monodeck over existing floorboards in broken bond pattern, applying adhesive to all tongue and grooved panel joints. Install skirting over exposed flanking band and trim off any excess.
  • Full installation instructions are available for download and must be used in conjunction when laying this floor system.

  

Properties
Thickness: 30mm
Length: 2400mm
Width: 600mm
Sheet Coverage: 1.44 m2
Weight per Sheet: 21.9 kg
Resilient layer thickness: 8mm
Resilient layer: Reconstituted ACF (Acoustic Chip Foam)
Resilient layer fire test: Tested to BS5852-2:1982

 

Isomass Monodeck T&G Acoustic Deck is also available in the following sizes:
Products Link to products:
17T 1200x600x17mm Click here
26T 2400x600x26mm Click here
32T 2400x600x32mm Click here
37T 2400x600x37mm Click here

 

 

Data Sheets

 

Data Sheet

 

Installation Guide

Delivery Information

Delivery Information & Instructions

Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.

To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.

Key Points to Note:

  1. Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
  2. Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
  3. Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.

Delivery Time and Order Confirmation

At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:

  • Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
  • Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
  • Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
  • Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
  • Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
  • Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
  • Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
  • Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
  • Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
  • Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
  • Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.

For more in-depth delivery information, please refer to our delivery policy page.

Reviews
Write Your Own Review
You're reviewing:Isomass Monodeck 30T T&G Acoustic Deck 2400 x 600 x 30mm
 

Have a question about this product?

Speak to our team
Nationwide delivery
super deals and promotions
Specialist supplier over 300 insulation products
including insulation board and plasterboard