Nationwide delivery

Nationwide delivery

Nationwide delivery

Specialist advice

Nationwide delivery

Best practices

Nationwide delivery

Secure checkout

Loading...

Isomass Monodeck 32T T&G Acoustic Deck 2400 x 600 x 32mm

£60.00 £50.00
POA
Product code:
IMMD32
Brand:
Isomass
Shopping Truck

3 -5 working days

Shipping costs displayed in basket

Ask a question about this product
Product Information
Data Sheets
Delivery Information
Reviews

The Monodeck 32T acoustic floor systems are designed to reduce impact sound transmission through a timber joisted floor where both the floorboards and the ceiling have been removed.

Monodeck 32T consists of a layer of 10mm reconstituted ACF (Acoustic Chip Foam) bonded to 22mm V313 P5 moisture resistant chipboard.

When installed as part of an Isomass approved separating floor construction, it enables a timber floor to meet the sound transmission regulations of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 and 2015

 

Application & Installation

  • To be used direct to joists for conversions, refurbishments, new build or listed buildings requiring minimal structural change with a new plasterboard or existing lath and plaster ceiling.
  • Apply Isocheck Acoustic Angled Flanking Band on the edges of the monodeck boards just before they are pushed against the perimeter walls to isolate the board from the wall (as shown in the diagrams).
  • Lay Monodeck 32T directly to the timber joists, in brick bond pattern, applying Isocheck adhesive to all tongued and grooved panel joints without the need for mechanical fixings.
  • Install skirting over exposed flanking band and trim off any excess.
  • Full installation instructions are available for download and must be used in conjunction when laying this floor system.

  

Properties
Thickness: 32mm
Length: 2400mm
Width: 600mm
Sheet Coverage: 1.44 m2
Weight per Sheet: 22.8 kg
Resilient layer thickness: 10mm
Resilient layer: High Density Reconstituted ACF (Acoustic Chip Foam)

 

Isomass Monodeck T&G Acoustic Deck is also available in the following sizes:
Products Link to products:
17T 1200x600x17mm Click here
26T 2400x600x26mm Click here
30T 2400x600x30mm Click here
37T 2400x600x37mm Click here

 

 

 

Data Sheet

 

Installation Guide

For delivery information, please refer to our delivery policy page.

Write Your Own Review
You're reviewing:Isomass Monodeck 32T T&G Acoustic Deck 2400 x 600 x 32mm
Product Information

The Monodeck 32T acoustic floor systems are designed to reduce impact sound transmission through a timber joisted floor where both the floorboards and the ceiling have been removed.

Monodeck 32T consists of a layer of 10mm reconstituted ACF (Acoustic Chip Foam) bonded to 22mm V313 P5 moisture resistant chipboard.

When installed as part of an Isomass approved separating floor construction, it enables a timber floor to meet the sound transmission regulations of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 and 2015

 

Application & Installation

  • To be used direct to joists for conversions, refurbishments, new build or listed buildings requiring minimal structural change with a new plasterboard or existing lath and plaster ceiling.
  • Apply Isocheck Acoustic Angled Flanking Band on the edges of the monodeck boards just before they are pushed against the perimeter walls to isolate the board from the wall (as shown in the diagrams).
  • Lay Monodeck 32T directly to the timber joists, in brick bond pattern, applying Isocheck adhesive to all tongued and grooved panel joints without the need for mechanical fixings.
  • Install skirting over exposed flanking band and trim off any excess.
  • Full installation instructions are available for download and must be used in conjunction when laying this floor system.

  

Properties
Thickness: 32mm
Length: 2400mm
Width: 600mm
Sheet Coverage: 1.44 m2
Weight per Sheet: 22.8 kg
Resilient layer thickness: 10mm
Resilient layer: High Density Reconstituted ACF (Acoustic Chip Foam)

 

Isomass Monodeck T&G Acoustic Deck is also available in the following sizes:
Products Link to products:
17T 1200x600x17mm Click here
26T 2400x600x26mm Click here
30T 2400x600x30mm Click here
37T 2400x600x37mm Click here

 

 

Data Sheets

 

Data Sheet

 

Installation Guide

Delivery Information

For delivery information, please refer to our delivery policy page.

Reviews
Write Your Own Review
You're reviewing:Isomass Monodeck 32T T&G Acoustic Deck 2400 x 600 x 32mm
 

Have a question about this product?