Mapei Colorite Beton Paint 20kg

Colorite Beton is a Semi-transparent acrylic paint.

Where to Use Mapei Colorite Beton Paint 20kg

For painting concrete structures, reinforced concrete and general cementitious surfaces with a coat of semi-transparent paint, leaving the “form-work” or “natural” finish of the piece visible and homogenising the colour. The special formulation of the product makes it particularly suitable for protecting surfaces against damage caused by CO2, SO2 and sunlight. The long-lasting, durable protection is also guaranteed by the product’s good repellence to water and its moderate permeability to vapour.

Some application examples of Mapei Colorite Beton Paint 20kg

• For painting concrete and reinforced concrete surfaces where the colour of the substrate requires homogenising while leaving the “form-work” or “natural” finish of the cementitious structure visible.
• Paint for protecting general cementitious surfaces exposed to aggressive pollution agents in industrial environments, such as exhaust gases and acid rain, or to prevent damage due to carbonation.

Features & Benefits: Mapei Colorite Beton Paint 20kg

• Colorite Beton is a semi-transparent paint for external walls, made up of non-saponifiable, pure acrylic resin in water dispersion.
• Colorite Beton protects cementitious substrates against damage caused by CO2 (carbonation) and SO2.
• Colorite Beton is resistant to all climatic conditions and the aggressive attack of smog, salt and sunlight, and provides a long-lasting protective coat for the substrate.
• Colorite Beton protects the substrate and leaves an attractive finish which evens out the colour without hiding the surface structure.
• Colorite Beton is available in 4 shades of grey in the standard range of colours. Further colours may also be created according to individual samples by using the ColorMap® automatic colouring system.
• Colorite Beton meets the requirements of EN 1504-9 (“Products and systems for protecting and repairing concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use and application of systems”), and the requirements of EN 1504-2 (“Surface protection system for concrete”) for class: surface protection products – coating (C) – ingress protection (1.3) (PI) (ZA.1d) + moisture control (2.2) (MC) and increasing resistivity (8.2) (IR) (ZA.1e)

Consumption

• Consumption is heavily influenced by the absorption and roughness of the substrate, and according to the application technique used. Under normal conditions, consumption is generally 0.25-0.3 kg/m² (for two coats of the product).

Standards

Product certified according to EN 1504-2 (Surface protection systems for concrete), 2+ and 3 compliance certification system – EN 1504-2 classes: surface protection products - coating - ingress protection (1.3) (ZA. 1d) + moisture control (2.2) and increase in resistivity (8.2) (ZA. 1e) (C, PI-MC-IR principles)