Mapei Elastocolor Primer 10kg

Product code: 09152

wp-image-insulationpoint-744.png

Customer service is excellent at insulation point. They go the extra mile to help out and that’s important as a supplier. Will definitely use again. Thank you

Mapei Elastocolor Primer 10kg

Product code: 09152

POA
Shipping Icon

Standard Delivery

3-5 Days

View delivery policy Ask a question about this product

Quantity Required

Truck Shipping Icon

Standard Delivery

3-5 Days

View delivery policy Ask a question about this product

Customer service is excellent at insulation point. They go the extra mile to help out and that’s important as a supplier. Will definitely use again. Thank you

Nationwide Delivery
Speak Our Team

Elastocolor is a Solvent-based penetrative primer.

Where to Use

  • Fixing treatment for chalking and dusty substrates such as cementitious renders and concrete surfaces before painting with Elastocolor Paint.
  • Anti-evaporation protection of fresh Mapegrout repair mortars, from rapid evaporation of water due to sun and wind.

Some application examples

  • Impregnation of superficially and remove porous surfaces dusty substrates, by impregnation. For example: cementitious and lime-based renders, asbestos cement and concrete blocks.
  • Priming concrete surfaces repaired with products from the Mapegrout range before smoothing with Elastocolor Rasante or painting with Elastocolor Paint.
  • Priming new concrete surfaces before smoothing with Elastocolor Rasante or painting with Elastocolor Paint.
  • Protection of fresh render and repair mortar surfaces, from rapid water evaporation, especially on hot or windy days, which can cause the formation of cracks in the plastic phase before painting over with Elastocolor Paint.

Technical Characteristics

  • Elastocolor Primer is a ready-to-use fixative, based on synthetic resins in solvent, prepared according to a formula developed in the MAPEI Research Laboratories.
  • Elastocolor Primer easily penetrates into porous substrates and ensures excellent insulation and good adherence to the paint that will be applied.
  • If used as an anti-evaporation product on fresh repair mortar surfaces from the Mapegrout range and cementitious and lime-based mortars, Elastocolor Primer does not have to be removed before protection with Elastocolor Paint because it does not interfere with the adhesion of the paint to the substrate.
  • When Elastocolor Primer is used as a fixative on cured surfaces, it can be painted over with Elastocolor Paint after 5-6 hours at +20°C. When Elastocolor Primer is used as an anti-evaporation agent, 3 weeks must pass before it can be painted over.
  • Elastocolor Primer satisfies UNI 8657 and UNI 8658 concerning anti-evaporation products.

Consumption

  • Used as a fixative: 100-150 g/m² depending on the porosity of the substrate.
  • Used as a curing agent: 110-150 g/m².
Mapei Elastocolor is also available in the following:
ProductsLink to products
Paint 20KgClick here
Waterproof Paint 20KgClick here
Tonachino Plus 20KgClick here

Loading Viewer...


Loading Viewer...

Delivery Information & Instructions

Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: AB, BT, DD, GY, HS, IM, IV, JE, KA, KW, LD, LL, PA, PH, PL, PO, SA, SY, TR, ZE. Additional charges may apply for these areas. Please contact us before placing your order if your delivery postcode falls in these areas.

To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.

Key Points to Note:

  1. Road Access:Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
  2. Moffett Requirements:If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
  3. Site Obstacles or Restrictions:Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.

Delivery Time and Order Confirmation

At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here’s what you can expect:

  • Order Confirmation: After placing an order, you’ll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
  • Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
  • Delivery Email: You’ll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
  • Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
  • Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we’ll notify you via email or phone.
  • Product Availability and Alternatives: If a product is unavailable, we’ll inform you and suggest suitable alternatives.
  • Delivery Time Window: Specific delivery times cannot be provided, but we’ll aim to deliver on the scheduled date.
  • Delivery Tracking: Tracking is not available, but you’ll receive email updates on your order status.
  • Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
  • Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
  • Email Communication: Check your junk/spam folders if you don’t see our emails. Contact our team for any assistance.

For more in-depth delivery information, please refer to our delivery policy page.

Reviews

There are no reviews yet.

Be the first to review “Mapei Elastocolor Primer 10kg”

Your email address will not be published. Required fields are marked *