Mapei Latex Plus Additive 6kg
Latex admixture imparting elasticity and enhanced adhesion to Keraquick S1 and Nivorapid
Where to Use
- As an admixture for Keraquick S1 to obtain a high performance, fast setting, slip resistant and highly deformable adhesive (class C2FT S2 according to EN12004), for ceramic tiles and stone material.
- As an admixture for Nivorapid to obtain an ultra-fast cementitious levelling compound with improved deformability and bonding strength.
Some application examples
Latex Plus + Keraquick S1
Fast-setting adhesive with high deformability and no vertical slip for interior and exterior installations of ceramic tiles and stone material. Interior and exterior installations of ceramic tiles (double-fired, single-fired, clinker, terracotta, vitreous mosaic, porcelain, etc.), including large format, and moisture-stable natural stones not subject to staining on:
- Underfloor heating installations.
- Façades, balconies, terraces.
- Precast concrete walls.
- Existing floors (ceramic tiles, marble, etc.).
- Cement screeds or hot-poured asphalt substrates (provided they are stable and well oxidized).
- Deformable surfaces (gypsum board panels, asbestos cement, etc.).
Latex Plus + Nivorapid
Fast-setting levelling compound with high deformability for interior surfaces.
- Levelling of wood flooring, chipboard, and plywood.
- Levelling of sheet metal, PVC, rubber, linoleum, strong non-woven flooring, and ceramic tile.
- Levelling walls and floors on all substrates normally used in construction, provided they are not subject to moisture.
- Levelling of flexible and deformable substrates varying in thickness from 3 to 20 mm (Nivorapid+Latex Plus), to ready them to receive ceramic, resilient or textile flooring.
Technical Characteristics
Keraquick S1 is a grey or white powder composed of a blend of special cement, selectively graded aggregates, synthetic resins and accelerators, which develop high bond strength 2-3 hours after mixing.
These properties allow floors and walls tiled using Keraquick S1 to be grouted after only 2 hours. Floors can also be subjected to light foot traffic after 2 hours and full-service conditions after 24 hours. Where floors are to be subjected to heavy-duty use, such as cherry pickers, the floor tiling should have been allowed to cure for a minimum of 7 days.
Mixing Latex Plus with Keraquick S1 improves the deformability to meet the requirements of class S2 (highly deformable) in accordance with EN 12004.
Consumption
Latex Plus + Keraquick S1
Nivorapid + Latex Plus
- Nivorapid: 1.3-1.5 kg/m² per mm of thickness.
- Latex Plus: 0.3-0.5 kg/m² per mm of thickness.
Standards
European EN 12004 as C2FT S2
DIN 18156
Data Sheet
Decalaration of Performance
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.
Latex admixture imparting elasticity and enhanced adhesion to Keraquick S1 and Nivorapid
Where to Use
- As an admixture for Keraquick S1 to obtain a high performance, fast setting, slip resistant and highly deformable adhesive (class C2FT S2 according to EN12004), for ceramic tiles and stone material.
- As an admixture for Nivorapid to obtain an ultra-fast cementitious levelling compound with improved deformability and bonding strength.
Some application examples
Latex Plus + Keraquick S1
Fast-setting adhesive with high deformability and no vertical slip for interior and exterior installations of ceramic tiles and stone material. Interior and exterior installations of ceramic tiles (double-fired, single-fired, clinker, terracotta, vitreous mosaic, porcelain, etc.), including large format, and moisture-stable natural stones not subject to staining on:
- Underfloor heating installations.
- Façades, balconies, terraces.
- Precast concrete walls.
- Existing floors (ceramic tiles, marble, etc.).
- Cement screeds or hot-poured asphalt substrates (provided they are stable and well oxidized).
- Deformable surfaces (gypsum board panels, asbestos cement, etc.).
Latex Plus + Nivorapid
Fast-setting levelling compound with high deformability for interior surfaces.
- Levelling of wood flooring, chipboard, and plywood.
- Levelling of sheet metal, PVC, rubber, linoleum, strong non-woven flooring, and ceramic tile.
- Levelling walls and floors on all substrates normally used in construction, provided they are not subject to moisture.
- Levelling of flexible and deformable substrates varying in thickness from 3 to 20 mm (Nivorapid+Latex Plus), to ready them to receive ceramic, resilient or textile flooring.
Technical Characteristics
Keraquick S1 is a grey or white powder composed of a blend of special cement, selectively graded aggregates, synthetic resins and accelerators, which develop high bond strength 2-3 hours after mixing.
These properties allow floors and walls tiled using Keraquick S1 to be grouted after only 2 hours. Floors can also be subjected to light foot traffic after 2 hours and full-service conditions after 24 hours. Where floors are to be subjected to heavy-duty use, such as cherry pickers, the floor tiling should have been allowed to cure for a minimum of 7 days.
Mixing Latex Plus with Keraquick S1 improves the deformability to meet the requirements of class S2 (highly deformable) in accordance with EN 12004.
Consumption
Latex Plus + Keraquick S1
Nivorapid + Latex Plus
- Nivorapid: 1.3-1.5 kg/m² per mm of thickness.
- Latex Plus: 0.3-0.5 kg/m² per mm of thickness.
Standards
European EN 12004 as C2FT S2
DIN 18156
Data Sheet
Decalaration of Performance
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.
including insulation board and plasterboard