Mapei Malech Primer 10kg
Malech is an Acrylic water-based primer that gives a smooth finish and bonding promoter.
Where to Use
Malech is used as a primer for wall surfaces in general (e.g. concrete or repairs with cement mortars) before applying a coloured finishing coat from the Elastocolor, Quarzolite and Colorite range, used as regulator of substrate absorption and as adhesion promoter.
Malech can also be used in the Aquaflex System cycle for permanent encapsulation of asbestos as a primer for covering layers of Aquaflex.
Some application examples
- As a primer on well cured new or old renders as long as they are not damaged, before applying a coloured finishing coat of Elastocolor, Quarzolite or Colorite range product.
- As a primer over old paint, even if slightly chalky, before applying Elastocolor, Quarzolite or Colorite coloured finishing coat.
- As a primer on surfaces that need to be treated in enclosed or poorly ventilated environments because Malech is odourless, before applying a product from Elastocolor, Quarzolite or Colorite ranges.
Technical Characteristics
- Malech is a micronized acrylic resin-based primer in water dispersion that, once applied on the surface, penetrates better than traditional water based primers. Malech is odourless and solvent free, therefore can be applied in close or poorly ventilated environments.
- Because of Malech’s formulation, it ensures the consolidation of chalk present on surfaces that need to be treated.
- Thanks to Malech’s deep penetration into the surface, it slows down the formation of efflorescence.
Consumption
- 0,10-0,15 kg/m² depending on the porosity of the substrate.
Data Sheet
Safety Data Sheet
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.
Malech is an Acrylic water-based primer that gives a smooth finish and bonding promoter.
Where to Use
Malech is used as a primer for wall surfaces in general (e.g. concrete or repairs with cement mortars) before applying a coloured finishing coat from the Elastocolor, Quarzolite and Colorite range, used as regulator of substrate absorption and as adhesion promoter.
Malech can also be used in the Aquaflex System cycle for permanent encapsulation of asbestos as a primer for covering layers of Aquaflex.
Some application examples
- As a primer on well cured new or old renders as long as they are not damaged, before applying a coloured finishing coat of Elastocolor, Quarzolite or Colorite range product.
- As a primer over old paint, even if slightly chalky, before applying Elastocolor, Quarzolite or Colorite coloured finishing coat.
- As a primer on surfaces that need to be treated in enclosed or poorly ventilated environments because Malech is odourless, before applying a product from Elastocolor, Quarzolite or Colorite ranges.
Technical Characteristics
- Malech is a micronized acrylic resin-based primer in water dispersion that, once applied on the surface, penetrates better than traditional water based primers. Malech is odourless and solvent free, therefore can be applied in close or poorly ventilated environments.
- Because of Malech’s formulation, it ensures the consolidation of chalk present on surfaces that need to be treated.
- Thanks to Malech’s deep penetration into the surface, it slows down the formation of efflorescence.
Consumption
- 0,10-0,15 kg/m² depending on the porosity of the substrate.
Data Sheet
Safety Data Sheet
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.
including insulation board and plasterboard