Nationwide delivery

Nationwide delivery

Nationwide delivery

Specialist advice

Nationwide delivery

Best practices

Nationwide delivery

Secure checkout

Loading...

Mapei Mapeband TPE 170 Sealing Tape 170mm x 30mtr

£406.57 £338.81
Product code:
MPMB170
Brand:
Mapei
Shopping Truck

3 -5 working days

Shipping costs displayed in basket

-
+
Mapei Mapeband TPE 170 Sealing Tape 170mm x 30mtr is available to buy in increments of 1
Ask a question about this product
Product Information
Data Sheets
Delivery Information
Reviews

TPE tape for flexible sealing and waterproofing expansion joints and over cracks subject to movement.

 

Where to Use

Waterproofing expansion joints in roadworks, tunnels, hydraulic works and covering areas subject to movement up to 5 or 10 mm, using Mapeband TPE 170 or Mapeband TPE 325 respectively.

 

Some application examples

  • Flexible waterproofing seal of expansion joints subject to large amounts of movement in service.
  • Flexible waterproofing seals in tunnels, roadworks, etc.
  • Sealing expansion joints in prefabricated panels.
  • Sealing structural joints in facades.
  • Sealing joints in hydraulic works, such as channels, basins, drains, pipework, etc.
  • Waterproofing joints in roadworks.
  • Waterproofing expansion joints in flat covering layers.

 

Technical Characteristics

Mapeband TPE consists of either 17 cm or 32.5 cm wide tape, called respectively Mapeband TPE 170 and Mapeband TPE 325, 1.2 mm thick, sidelong reinforced with polyester non-woven fabric.

Mapeband TPE must be applied by bonding with Adesilex PG4 two-component, low viscosity, thixotropic epoxy adhesive.

 

TPE, short for “Elastomeric Thermoplastic Polyolefine”, is the name given to a special group of polyolefines which combine the best properties of thermoplastic polymers and synthetic elastomer technology. Mapeband TPE may be hot welded with a Leister electronic hot air blower.

 

Mapeband TPE may be also joined by using the “cold-weld” technique by applying a contact adhesive, such as Adesilex LP solvented, poly-chloroprene adhesive, to both surfaces. This technique makes it easy to form linear joints or to create special pieces with the tape, to guarantee the waterproof integrity of the entire system. The tape remains permanently flexible and deformable even at low temperatures and, furthermore, it is resistant to ageing even if exposed to atmospheric agents and UV rays.

The composition of Mapeband TPE gives it excellent resistance to alkalis, bitumen, diluted lye, slightly acidic solutions and salt solutions.

 

Mapei Mapeband TPE Sealing Tape is also available in the following:
Products Link to products
TPE 325 Click here
 

 

 

Data Sheet

For delivery information, please refer to our delivery policy page.

Write Your Own Review
You're reviewing:Mapei Mapeband TPE 170 Sealing Tape 170mm x 30mtr
Product Information

TPE tape for flexible sealing and waterproofing expansion joints and over cracks subject to movement.

 

Where to Use

Waterproofing expansion joints in roadworks, tunnels, hydraulic works and covering areas subject to movement up to 5 or 10 mm, using Mapeband TPE 170 or Mapeband TPE 325 respectively.

 

Some application examples

  • Flexible waterproofing seal of expansion joints subject to large amounts of movement in service.
  • Flexible waterproofing seals in tunnels, roadworks, etc.
  • Sealing expansion joints in prefabricated panels.
  • Sealing structural joints in facades.
  • Sealing joints in hydraulic works, such as channels, basins, drains, pipework, etc.
  • Waterproofing joints in roadworks.
  • Waterproofing expansion joints in flat covering layers.

 

Technical Characteristics

Mapeband TPE consists of either 17 cm or 32.5 cm wide tape, called respectively Mapeband TPE 170 and Mapeband TPE 325, 1.2 mm thick, sidelong reinforced with polyester non-woven fabric.

Mapeband TPE must be applied by bonding with Adesilex PG4 two-component, low viscosity, thixotropic epoxy adhesive.

 

TPE, short for “Elastomeric Thermoplastic Polyolefine”, is the name given to a special group of polyolefines which combine the best properties of thermoplastic polymers and synthetic elastomer technology. Mapeband TPE may be hot welded with a Leister electronic hot air blower.

 

Mapeband TPE may be also joined by using the “cold-weld” technique by applying a contact adhesive, such as Adesilex LP solvented, poly-chloroprene adhesive, to both surfaces. This technique makes it easy to form linear joints or to create special pieces with the tape, to guarantee the waterproof integrity of the entire system. The tape remains permanently flexible and deformable even at low temperatures and, furthermore, it is resistant to ageing even if exposed to atmospheric agents and UV rays.

The composition of Mapeband TPE gives it excellent resistance to alkalis, bitumen, diluted lye, slightly acidic solutions and salt solutions.

 

Mapei Mapeband TPE Sealing Tape is also available in the following:
Products Link to products
TPE 325 Click here
 

 

Data Sheets

 

Data Sheet

Delivery Information

For delivery information, please refer to our delivery policy page.

Reviews
Write Your Own Review
You're reviewing:Mapei Mapeband TPE 170 Sealing Tape 170mm x 30mtr
 

Have a question about this product?