Nationwide delivery

Nationwide delivery

Nationwide delivery

Specialist advice

Nationwide delivery

Best practices

Nationwide delivery

Secure checkout

Loading...

Mapei Mapelastic 2 Part Kit 24+8kg

£156.00 £130.00
Product code:
MPML2P
Brand:
Mapei
Shopping Truck

3 -5 working days

Shipping costs displayed in basket

Ask a question about this product
Product Information
Data Sheets
Delivery Information
Reviews

Two-component cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools

 

Where to Use

Waterproofing and protection of concrete structures, renders and cementitious screeds.

 

Some application examples

  • Waterproofing of concrete basins used for containing water.
  • Waterproofing bathrooms, showers, balconies, terraces, swimming pools, etc. before laying ceramic tile finishes.
  • Waterproofing of plasterboard, render or cementitious surfaces, lightweight cement blocks and marine-grade plywood.
  • Flexible smoothing layer for light-sectioned concrete structures, including those subjected to minor deformation when under load (e.g. pre-cast panels).
  • Protection of renders or concrete with cracks caused by shrinkage, against the infiltration of water and aggressive atmospheric elements.
  • Protection, against the penetration of carbon dioxide, of concrete pillars beams, road and railway viaducts repaired with products from the Mapegrout range, and structures with an insufficient layer of concrete covering on the reinforcement rods.
  • Protection of concrete surfaces which may encounter seawater, de-icing salts, such as sodium or calcium chloride, and sulphates.

 

Some of the Advantages of Mapelastic are:

  • Remains flexible at very low temperatures (-20°C).
  • 30 years experience and more than 300 million m² of surfaces successfully waterproofed.
  • CE-certified product in compliance with EN 1504-2 and EN 14891.
  • Protects the surface of concrete from CO₂ penetration (carbonation) for more than 50 years.
  • Resistant to UV rays.
  • 5 mm of Mapelastic represents the equivalent of 30 mm of concrete against the aggressive action of chlorides (w/c ratio 0.45).
  • May also be applied on existing coverings.
  • Compatible with ceramic, mosaic and natural stone coverings.
  • Product certified EC1 R Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte Verlegewerkstoffe, e.V.) as a product with very low emission of volatile organic compounds.

 

Technical Characteristics

Mapelastic is a two-component mortar based on cementitious binders, fine-grained selected aggregates, special admixtures and synthetic polymers dispersed in water, blended according to a formula developed in MAPEI’s own research laboratories. When the two components are mixed together, a free-flowing mix is obtained which may be easily applied, even on vertical surfaces, at a thickness of up to 2 mm in one single coat. Due to the high content and quality of the synthetic resins, the cured layer of Mapelastic remains constantly flexible under all environmental conditions and resistant to the chemical attack of de-icing salts, sulphates, chlorides and carbon dioxide.

Mapelastic has excellent bonding properties to all concrete, masonry, ceramic and marble surfaces, as long as they are sound and sufficiently clean. This property, together with its resistance to the deteriorating effect of UV rays, a characteristic of this product, ensures that structures protected and waterproofed with Mapelastic have a long service life, even if they are located in areas with particularly difficult climatic conditions, in coastal areas with a saline rich atmosphere or industrial areas where the air is particularly polluted.

 

Consumption

  • Manual application: approx. 1.7 kg/m2 per mm of thickness.
  • Spray gun application: approx. 2.2 kg/m2 per mm of thickness.

 

Data Sheet

 

Safety Data Sheet

For delivery information, please refer to our delivery policy page.

Write Your Own Review
You're reviewing:Mapei Mapelastic 2 Part Kit 24+8kg
Product Information

Two-component cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools

 

Where to Use

Waterproofing and protection of concrete structures, renders and cementitious screeds.

 

Some application examples

  • Waterproofing of concrete basins used for containing water.
  • Waterproofing bathrooms, showers, balconies, terraces, swimming pools, etc. before laying ceramic tile finishes.
  • Waterproofing of plasterboard, render or cementitious surfaces, lightweight cement blocks and marine-grade plywood.
  • Flexible smoothing layer for light-sectioned concrete structures, including those subjected to minor deformation when under load (e.g. pre-cast panels).
  • Protection of renders or concrete with cracks caused by shrinkage, against the infiltration of water and aggressive atmospheric elements.
  • Protection, against the penetration of carbon dioxide, of concrete pillars beams, road and railway viaducts repaired with products from the Mapegrout range, and structures with an insufficient layer of concrete covering on the reinforcement rods.
  • Protection of concrete surfaces which may encounter seawater, de-icing salts, such as sodium or calcium chloride, and sulphates.

 

Some of the Advantages of Mapelastic are:

  • Remains flexible at very low temperatures (-20°C).
  • 30 years experience and more than 300 million m² of surfaces successfully waterproofed.
  • CE-certified product in compliance with EN 1504-2 and EN 14891.
  • Protects the surface of concrete from CO₂ penetration (carbonation) for more than 50 years.
  • Resistant to UV rays.
  • 5 mm of Mapelastic represents the equivalent of 30 mm of concrete against the aggressive action of chlorides (w/c ratio 0.45).
  • May also be applied on existing coverings.
  • Compatible with ceramic, mosaic and natural stone coverings.
  • Product certified EC1 R Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte Verlegewerkstoffe, e.V.) as a product with very low emission of volatile organic compounds.

 

Technical Characteristics

Mapelastic is a two-component mortar based on cementitious binders, fine-grained selected aggregates, special admixtures and synthetic polymers dispersed in water, blended according to a formula developed in MAPEI’s own research laboratories. When the two components are mixed together, a free-flowing mix is obtained which may be easily applied, even on vertical surfaces, at a thickness of up to 2 mm in one single coat. Due to the high content and quality of the synthetic resins, the cured layer of Mapelastic remains constantly flexible under all environmental conditions and resistant to the chemical attack of de-icing salts, sulphates, chlorides and carbon dioxide.

Mapelastic has excellent bonding properties to all concrete, masonry, ceramic and marble surfaces, as long as they are sound and sufficiently clean. This property, together with its resistance to the deteriorating effect of UV rays, a characteristic of this product, ensures that structures protected and waterproofed with Mapelastic have a long service life, even if they are located in areas with particularly difficult climatic conditions, in coastal areas with a saline rich atmosphere or industrial areas where the air is particularly polluted.

 

Consumption

  • Manual application: approx. 1.7 kg/m2 per mm of thickness.
  • Spray gun application: approx. 2.2 kg/m2 per mm of thickness.
Data Sheets

 

Data Sheet

 

Safety Data Sheet

Delivery Information

For delivery information, please refer to our delivery policy page.

Reviews
Write Your Own Review
You're reviewing:Mapei Mapelastic 2 Part Kit 24+8kg
 

Have a question about this product?