
Mapei Mapelastic Foundation 2 Part Kit 22+10kg
Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure
Where to Use Waterproofing concrete and masonry structures subject to positive or negative hydrostatic pressure. It is recommended for foundation walls, carparks and underground environments, basins, channels and swimming pools.
Some application examples
Technical Characteristics Mapelastic Foundation is a two-component mortar based on cementitious binders, fine-grained selected inert materials, inorganic fibres, special additives and synthetic polymers in water dispersion, blended according to a formula developed in MAPEI’s own Research & Development laboratories. When the two components are mixed, a plastic consistency is obtained. It may be applied with a roller or by spray on both horizontal and vertical surfaces, at a thickness of at least 2 mm. Thanks to the high content and quality of the synthetic resins, the hardened layer of Mapelastic Foundation is highly flexible and remains stable under all environmental conditions. When mixed, the product is highly thixotropic, which reduces waste to a minimum during the application phase with a roller. Mapelastic Foundation is completely waterproof against positive pressure, and is waterproof against negative pressure of up to 1.5 atm (15 m column of water). Once cured, it is resistant to soluble salts which are present in sea water or in the ground, such as chlorides and sulphates. Mapelastic Foundation also has excellent bonding strength on all cementitious substrates if they have been suitably prepared. All these properties keep structures protected and waterproofed with Mapelastic Foundation perfectly dry over the years. Mapelastic Foundation fulfils all the main criteria for the EN 1504-9 Standards (“Products and systems for the protection and repair of concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use of products and systems”) and the requirements for EN 1504-2 Standards according to PI-MC-IR principles (“Protection systems for concrete surfaces”). Product certified EC1 Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte Verlegewerkstoffe, e.V.) as a product with very low emission of volatile organic compounds.
Consumption
|
|
||||||||
Data Sheet
Safety Data Sheet
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.
Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure
Where to Use Waterproofing concrete and masonry structures subject to positive or negative hydrostatic pressure. It is recommended for foundation walls, carparks and underground environments, basins, channels and swimming pools.
Some application examples
Technical Characteristics Mapelastic Foundation is a two-component mortar based on cementitious binders, fine-grained selected inert materials, inorganic fibres, special additives and synthetic polymers in water dispersion, blended according to a formula developed in MAPEI’s own Research & Development laboratories. When the two components are mixed, a plastic consistency is obtained. It may be applied with a roller or by spray on both horizontal and vertical surfaces, at a thickness of at least 2 mm. Thanks to the high content and quality of the synthetic resins, the hardened layer of Mapelastic Foundation is highly flexible and remains stable under all environmental conditions. When mixed, the product is highly thixotropic, which reduces waste to a minimum during the application phase with a roller. Mapelastic Foundation is completely waterproof against positive pressure, and is waterproof against negative pressure of up to 1.5 atm (15 m column of water). Once cured, it is resistant to soluble salts which are present in sea water or in the ground, such as chlorides and sulphates. Mapelastic Foundation also has excellent bonding strength on all cementitious substrates if they have been suitably prepared. All these properties keep structures protected and waterproofed with Mapelastic Foundation perfectly dry over the years. Mapelastic Foundation fulfils all the main criteria for the EN 1504-9 Standards (“Products and systems for the protection and repair of concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use of products and systems”) and the requirements for EN 1504-2 Standards according to PI-MC-IR principles (“Protection systems for concrete surfaces”). Product certified EC1 Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte Verlegewerkstoffe, e.V.) as a product with very low emission of volatile organic compounds.
Consumption
|
|
||||||||
Data Sheet
Safety Data Sheet
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.