Mapei Mapelastic Turbo 2 Part Kit 20+16kg

Two-component, rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not completely dry.

Where to Use

Rapid waterproofing product for concrete structures, cementitious screeds and old floor and wall coverings, including at low temperatures.

Some application examples

• Waterproofing balconies, terraces, flat roofs, swimming pools before bonding ceramic, mosaic or natural stone floor and wall coverings.
• Waterproofing terraces and balconies by overlaying on existing floor coverings before bonding new flooring.

Some of the advantages of Mapelastic Smart:

• Suitable for tiling after around 4 hours in normal weather conditions and within 24 hours at temperatures down to +5°C.
• Also suitable for substrates not completely dry as long as they are well cured.
• Rain-fast after just a few hours, including at low temperatures and in high levels of R.H. (relative humidity).
• CE marking according to EN 14891 and EN 1504-2 standards.
• Resistant to UV rays.
• Also suitable for overlaying existing ceramic, all types of mosaic and natural stone floor and wall coverings.
• Product certified EC1 R Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte Verlegewerkstoffe, e.V.) as a product with very low emission of volatile organic compounds.

Technical Characteristics

Mapelastic Turbo is a two-component, cementitious binder-based mortar with fine-grained selected aggregates, special admixtures and synthetic polymers in water dispersion.

The Turbo version has the same resistance to chemical attack from de-icing salts, sulphates, chlorides and carbon dioxide that guarantees the durability of Mapelastic over the years.

When the two components are mixed, they form a fluid mix with good workability. It is applied in two layers, with alkali-resistant reinforcement embedded between the layers (such as Mapenet 150 or Mapetex Sel), to form a total thickness of at least 2 mm.

Mapelastic Turbo also has excellent adhesion on all concrete surfaces and cementitious screeds, as well as ceramic, mosaics, natural stone and terrazzo, as long as they are well bonded to the substrate and prepared as specified.

The setting time of Mapelastic Turbo allows surfaces to be waterproofed and floor and wall coverings to be bonded within 24 hours when used in conjunction with a rapid adhesive from the MAPEI range, even if the surrounding conditions are not ideal.

Mapelastic Turbo complies with the principles defined in EN 1504-9 (“Products and systems for protecting and repairing concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use of products and systems”) and the requirements of EN 1504-2 coating (C) according to principles PI, MC and IR (“Concrete surface protection systems”).

Mapelastic Turbo meets the requirements of EN 14891 (“Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives”).

Consumption

• Approximately 2.4 kg/m² (for two coats of product with reinforcement embedded between the two layers).