Mapei Mapenet 150 Roll 1mtr x 50mtr
Alkali-resistant (according to ETAG 004 test, paragraph 5.6.7.1) fibre glass mesh used to reinforce waterproof protection layers, anti-fracture membranes and cementitious smoothing and levelling layers.
Where to Use
Reinforced strengthening for:
- Mapelastic, Mapelastic Smart, Mapelastic Turbo or Monolastic used for waterproofing terraces, balconies, swimming pools, baths, shower cubicles, etc. with ceramic tile or stone finishes.
- Protective, flexible smoothing layers of Mapelastic, Mapelastic Smart, Mapelastic Turbo or Monolastic applied on internal and external cementitious substrates with micro cracks.
- Products of the Plastimul range when applied on substrates with micro cracks.
- Cementitious skim coats in general.
Technical Characteristics
The mesh is made from glass fibres treated with a special primer which makes it resistant to alkalis according to the requirements of the EAD specification 040016-00-0404 (that replaced ETAG 004 from October the 28, 2020).
Once the waterproofing layer where it is installed has hardened, Mapenet 150 reinforces the layer to protect against the formation of cracks due to movement in the substrate or the tiled surface. It also makes it easier to apply an even layer of the chosen product and improves the system’s resistance to temperature variations and abrasion.
Data Sheet
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.
Alkali-resistant (according to ETAG 004 test, paragraph 5.6.7.1) fibre glass mesh used to reinforce waterproof protection layers, anti-fracture membranes and cementitious smoothing and levelling layers.
Where to Use
Reinforced strengthening for:
- Mapelastic, Mapelastic Smart, Mapelastic Turbo or Monolastic used for waterproofing terraces, balconies, swimming pools, baths, shower cubicles, etc. with ceramic tile or stone finishes.
- Protective, flexible smoothing layers of Mapelastic, Mapelastic Smart, Mapelastic Turbo or Monolastic applied on internal and external cementitious substrates with micro cracks.
- Products of the Plastimul range when applied on substrates with micro cracks.
- Cementitious skim coats in general.
Technical Characteristics
The mesh is made from glass fibres treated with a special primer which makes it resistant to alkalis according to the requirements of the EAD specification 040016-00-0404 (that replaced ETAG 004 from October the 28, 2020).
Once the waterproofing layer where it is installed has hardened, Mapenet 150 reinforces the layer to protect against the formation of cracks due to movement in the substrate or the tiled surface. It also makes it easier to apply an even layer of the chosen product and improves the system’s resistance to temperature variations and abrasion.
Data Sheet
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.
including insulation board and plasterboard