Mapei Mapetherm AR1 GG Grey 25kg

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product code:

MPMTAGG

Mapei Mapetherm AR1 GG Grey 25kg is available to buy in increments of 1

View product details

Ask a question about this product

Be the first to review this product

£26.82 £22.35

Delivery:

3 -5 working days

Shipping costs displayed in basket

View delivery policy

Product Information

Data Sheets

Delivery Information

Reviews

One component cementitious mortar for bonding, levelling and reinforcing thermal-insulating panels and thermal insulation systems.

Where to Use

Bonding all types of thermal-insulating panels (foam/extruded polystyrene, expanded polystyrene, mineral fibres, cork, etc.) directly on render, masonry and concrete on walls and ceilings.
A reinforcing coat for thermal-insulating panels with embedded fibreglass reinforcing mesh on internal and external walls (thermal insulation system).

Some application examples

Bonding and smoothing internal and external insulating panels and thermal insulation systems on:

Cementitious render or lime-mortar render.
Concrete.
Concrete blocks.
Approved render boards.
Brickwork.

Also suitable for bonding insulation panels and reinforcing coat systems for:

Insulating inside faces of walls in rooms above ground.
Insulating inside faces of retaining walls in basements.
Insulating inside faces of loft ceilings.
Insulating external faces of ventilated façades.
For use as a dash receiver and brick slip adhesive, plus synthetic brick slip or tile adhesive.
For use with MAPEI approved backing boards as a render only system on to steel and timber framed buildings.

Technical Characteristics

Mapetherm AR1 GG is a grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm, developed according to a formula developed in MAPEI’s own research laboratories. When mixed with water, it forms a mortar with the following characteristics:

Low viscosity and, therefore, good workability.
High thixotropic consistency: Mapetherm AR1 GG may be applied on vertical surfaces without running and without the risk of insulating panels slipping, including large sized panels.
Bonds perfectly to all materials normally used in the building industry.
Hardens without shrinking.

Consumption

For bonding insulating panels: 4-6 kg/m² according to the bonding technique used.
Smoothing and levelling: 1.3-1.5 kg/m² per mm of thickness (recommended thickness: approximately 4 mm in 2 layers).

Mapei Mapetherm AR1 GG is also available in the following:
Products	Link to products
White 25Kg	Click here

Data Sheet

Safety Data Sheet

Declaration of Performance

Delivery Information & Instructions

Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.

To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.

Key Points to Note:

Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.

Delivery Time and Order Confirmation

At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:

Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.

For more in-depth delivery information, please refer to our delivery policy page.

Write Your Own Review