Nationwide delivery

Nationwide delivery

Nationwide delivery

Specialist advice

Nationwide delivery

Best practices

Nationwide delivery

Secure checkout

Loading...

Mapei Mapetherm AR1 GG White 25kg

£28.80 £24.00
Product code:
MPMTAGW
Brand:
Mapei
Shopping Truck

3 -5 working days

Shipping costs displayed in basket

-
+
Ask a question about this product
Product Information
Data Sheets
Delivery Information
Reviews

One component cementitious mortar for bonding, levelling and reinforcing thermal-insulating panels and thermal insulation systems.

 

Where to Use

  • Bonding all types of thermal-insulating panels (foam/extruded polystyrene, expanded polystyrene, mineral fibres, cork, etc.) directly on render, masonry and concrete on walls and ceilings.
  • A reinforcing coat for thermal-insulating panels with embedded fibreglass reinforcing mesh on internal and external walls (thermal insulation system).

 

Some application examples

Bonding and smoothing internal and external insulating panels and thermal insulation systems on:

  • Cementitious render or lime-mortar render.
  • Concrete.
  • Concrete blocks.
  • Approved render boards.
  • Brickwork.

 

Also suitable for bonding insulation panels and reinforcing coat systems for:

  • Insulating inside faces of walls in rooms above ground.
  • Insulating inside faces of retaining walls in basements.
  • Insulating inside faces of loft ceilings.
  • Insulating external faces of ventilated façades.
  • For use as a dash receiver and brick slip adhesive, plus synthetic brick slip or tile adhesive.
  • For use with MAPEI approved backing boards as a render only system on to steel and timber framed buildings.

 

Technical Characteristics

Mapetherm AR1 GG is a grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm, developed according to a formula developed in MAPEI’s own research laboratories. When mixed with water, it forms a mortar with the following characteristics:

  • Low viscosity and, therefore, good workability.
  • High thixotropic consistency: Mapetherm AR1 GG may be applied on vertical surfaces without running and without the risk of insulating panels slipping, including large sized panels.
  • Bonds perfectly to all materials normally used in the building industry.
  • Hardens without shrinking.

 

Consumption

  • For bonding insulating panels: 4-6 kg/m² according to the bonding technique used.
  • Smoothing and levelling: 1.3-1.5 kg/m² per mm of thickness (recommended thickness: approximately 4 mm in 2 layers).

 

Mapei Mapetherm AR1 GG is also available in the following:
Products Link to products
Grey 25Kg Click here
 

 

 

Data Sheet

 

Safety Data Sheet

 

Declaration of Performance

For delivery information, please refer to our delivery policy page.

Write Your Own Review
You're reviewing:Mapei Mapetherm AR1 GG White 25kg
Product Information

One component cementitious mortar for bonding, levelling and reinforcing thermal-insulating panels and thermal insulation systems.

 

Where to Use

  • Bonding all types of thermal-insulating panels (foam/extruded polystyrene, expanded polystyrene, mineral fibres, cork, etc.) directly on render, masonry and concrete on walls and ceilings.
  • A reinforcing coat for thermal-insulating panels with embedded fibreglass reinforcing mesh on internal and external walls (thermal insulation system).

 

Some application examples

Bonding and smoothing internal and external insulating panels and thermal insulation systems on:

  • Cementitious render or lime-mortar render.
  • Concrete.
  • Concrete blocks.
  • Approved render boards.
  • Brickwork.

 

Also suitable for bonding insulation panels and reinforcing coat systems for:

  • Insulating inside faces of walls in rooms above ground.
  • Insulating inside faces of retaining walls in basements.
  • Insulating inside faces of loft ceilings.
  • Insulating external faces of ventilated façades.
  • For use as a dash receiver and brick slip adhesive, plus synthetic brick slip or tile adhesive.
  • For use with MAPEI approved backing boards as a render only system on to steel and timber framed buildings.

 

Technical Characteristics

Mapetherm AR1 GG is a grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm, developed according to a formula developed in MAPEI’s own research laboratories. When mixed with water, it forms a mortar with the following characteristics:

  • Low viscosity and, therefore, good workability.
  • High thixotropic consistency: Mapetherm AR1 GG may be applied on vertical surfaces without running and without the risk of insulating panels slipping, including large sized panels.
  • Bonds perfectly to all materials normally used in the building industry.
  • Hardens without shrinking.

 

Consumption

  • For bonding insulating panels: 4-6 kg/m² according to the bonding technique used.
  • Smoothing and levelling: 1.3-1.5 kg/m² per mm of thickness (recommended thickness: approximately 4 mm in 2 layers).

 

Mapei Mapetherm AR1 GG is also available in the following:
Products Link to products
Grey 25Kg Click here
 

 

Data Sheets

 

Data Sheet

 

Safety Data Sheet

 

Declaration of Performance

Delivery Information

For delivery information, please refer to our delivery policy page.

Reviews
Write Your Own Review
You're reviewing:Mapei Mapetherm AR1 GG White 25kg
 

Have a question about this product?