Mapei Nivorapid Levelling Mortar 25kg
Ultra-fast setting, thixotropic, cementitious levelling compound for horizontal and vertical surfaces, from 1 to 20 mm thick layer.
Where to Use
Nivorapid is used for repairing, levelling and smoothing interior floors, walls, steps and arrises where very rapid hardening and drying are required.
Some application examples
- Smoothing concrete slabs and screeds made with Mapecem, Mapecem Pronto, Topcem, Topcem Pronto, anhydrite, and magnesium-based screeds as well as cast asphalt.
- Smoothing terrazzo, ceramic, natural stone or heated floors.
- Smoothing concrete walls, cementitious renders, foamed concrete blocks and ceramic.
- Repair or levelling steps, landings and edges of pillars.
- Filling depressions and holes in floors, walls and ceilings.
By adding Latex Plus to Nivorapid, levelling with excellent bonding strength on metal surfaces, old rubber floors, PVC, needle punch, chipboard, parquet, linoleum or similar (see technical data sheet for Latex Plus) is obtained.
Technical Characteristics
Nivorapid is a grey-brown powder composed of cementitious binders, selected graded aggregates and synthetic admixtures prepared according to a formula developed in the MAPEI research laboratories.
Nivorapid mixed with water becomes an easily workable thixotropic paste with high bonding strength to substrates and rapid drying which allows subsequent installation operations for floor and wall coverings, or painting, within only 4-6 hours after application.
Nivorapid hardens without shrinkage and without the formation of cracks or crazing. It develops high compressive and flexural strength and is very resistant to impact and abrasion.
Consumption
- 6 kg/m² per mm of thickness.
Standards
Classification according to EN 13813 The smoothing compounds prepared with Nivorapid in compliance with the prescriptions present in this technical data sheet are classified as CT - C40 - F10 - A2fl according to European Norm 13813.
Data Sheet
Declaration of Performance
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.
Ultra-fast setting, thixotropic, cementitious levelling compound for horizontal and vertical surfaces, from 1 to 20 mm thick layer.
Where to Use
Nivorapid is used for repairing, levelling and smoothing interior floors, walls, steps and arrises where very rapid hardening and drying are required.
Some application examples
- Smoothing concrete slabs and screeds made with Mapecem, Mapecem Pronto, Topcem, Topcem Pronto, anhydrite, and magnesium-based screeds as well as cast asphalt.
- Smoothing terrazzo, ceramic, natural stone or heated floors.
- Smoothing concrete walls, cementitious renders, foamed concrete blocks and ceramic.
- Repair or levelling steps, landings and edges of pillars.
- Filling depressions and holes in floors, walls and ceilings.
By adding Latex Plus to Nivorapid, levelling with excellent bonding strength on metal surfaces, old rubber floors, PVC, needle punch, chipboard, parquet, linoleum or similar (see technical data sheet for Latex Plus) is obtained.
Technical Characteristics
Nivorapid is a grey-brown powder composed of cementitious binders, selected graded aggregates and synthetic admixtures prepared according to a formula developed in the MAPEI research laboratories.
Nivorapid mixed with water becomes an easily workable thixotropic paste with high bonding strength to substrates and rapid drying which allows subsequent installation operations for floor and wall coverings, or painting, within only 4-6 hours after application.
Nivorapid hardens without shrinkage and without the formation of cracks or crazing. It develops high compressive and flexural strength and is very resistant to impact and abrasion.
Consumption
- 6 kg/m² per mm of thickness.
Standards
Classification according to EN 13813 The smoothing compounds prepared with Nivorapid in compliance with the prescriptions present in this technical data sheet are classified as CT - C40 - F10 - A2fl according to European Norm 13813.
Data Sheet
Declaration of Performance
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.
including insulation board and plasterboard