Wondertex Premier Finishing Compound 25kg
Wondertex's Prem Finish plasterboard finishing compound is suitable for finishing all plasterboard joints. It is developed for hand and machine jointing.
Key Features:
- Mix with water for easy application
- Suitable for hand and machine jointing
- Extended working time, less wastage
- Effortless sanding
- No shrinkage, no cracking
Surface Preparation:
- Inspect boards for quality before jointing.
- Ensure all boards are securely fixed and protruding screws or nails are driven in.
- Fill gaps larger than 3mm with Wondertex prem filler.
- Repair damaged boards before starting.
- Minor surface damage can be sanded with fine sandpaper.
- Deeper indentations and damaged areas can be filled with Wondertex prem filler.
- Extensive damage to the plasterboard core requires patching with new board.
Mixing:
- Use clean water, buckets, and tools.
- Mix ratio: 1 part water to 2 parts powder, or 12 litres of water per 25kg bag.
- Thoroughly mix Wondertex prem finish until lump-free.
- Let the mixed material stand for 5 minutes, then remix before use.
- Adjust consistency as needed, but avoid over-diluting.
Application and Fixing:
- Wondertex prem finish is suitable for use with various tapes.
- Apply filler to the trough of tapered edge joints.
- Center tape over the joint, and press down to release air bubbles.
- Leave filler under tape for good adhesion, remove excess.
- Apply more filler over the tape before it stiffens, making it flush with the surface.
- For self-adhesive tape, fix the tape firmly to the plasterboard, then apply filler.
- Once the filler is dry, apply the first coat of Wondertex prem finish to the joint.
- Apply a second coat of finish, feathering and smoothing edges.
- Sand surface smooth when dry, avoiding over-sanding.
Data Sheet
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.
Wondertex's Prem Finish plasterboard finishing compound is suitable for finishing all plasterboard joints. It is developed for hand and machine jointing.
Key Features:
- Mix with water for easy application
- Suitable for hand and machine jointing
- Extended working time, less wastage
- Effortless sanding
- No shrinkage, no cracking
Surface Preparation:
- Inspect boards for quality before jointing.
- Ensure all boards are securely fixed and protruding screws or nails are driven in.
- Fill gaps larger than 3mm with Wondertex prem filler.
- Repair damaged boards before starting.
- Minor surface damage can be sanded with fine sandpaper.
- Deeper indentations and damaged areas can be filled with Wondertex prem filler.
- Extensive damage to the plasterboard core requires patching with new board.
Mixing:
- Use clean water, buckets, and tools.
- Mix ratio: 1 part water to 2 parts powder, or 12 litres of water per 25kg bag.
- Thoroughly mix Wondertex prem finish until lump-free.
- Let the mixed material stand for 5 minutes, then remix before use.
- Adjust consistency as needed, but avoid over-diluting.
Application and Fixing:
- Wondertex prem finish is suitable for use with various tapes.
- Apply filler to the trough of tapered edge joints.
- Center tape over the joint, and press down to release air bubbles.
- Leave filler under tape for good adhesion, remove excess.
- Apply more filler over the tape before it stiffens, making it flush with the surface.
- For self-adhesive tape, fix the tape firmly to the plasterboard, then apply filler.
- Once the filler is dry, apply the first coat of Wondertex prem finish to the joint.
- Apply a second coat of finish, feathering and smoothing edges.
- Sand surface smooth when dry, avoiding over-sanding.
Data Sheet
Delivery Information & Instructions
Delivery charges are included in the final shopping basket and apply to mainland UK, excluding the Islands, Scottish Highlands, and specific postcodes: IV, KW, HS, AB, PH19-48, DD, ZE. Additional charges may apply for these areas.
To ensure smooth deliveries, please provide detailed information about your site when placing your order. This will help us plan delivery routes effectively.
Key Points to Note:
- Road Access: Inform us of any restrictions (narrow roads, low bridges, weight limits) that might prevent a 26-tonne lorry from entering.
- Moffett Requirements: If a Moffett is needed for offloading, let us know in advance so we can make the necessary arrangements.
- Site Obstacles or Restrictions: Notify us of any on-site obstacles (height restrictions, overhead wires, tight turning spaces) to aid our drivers in planning their approach.
Delivery Time and Order Confirmation
At Insulation Point, we strive to keep you informed throughout the order and delivery process. Here's what you can expect:
- Order Confirmation: After placing an order, you'll receive a confirmation email with details of your purchase. Review this to ensure accuracy.
- Processing Time: Orders are processed within 1-2 working days, depending on product availability and other factors.
- Delivery Email: You'll receive an email confirming delivery detail within 1-2 working days after processing, including an estimated delivery date.
- Lead Time: Deliveries to mainland UK typically take 3-5 working days. Kingspan products may take 5-7 working days.
- Manufacturer Availability: Delivery schedules may vary. If changes or delays occur, we'll notify you via email or phone.
- Product Availability and Alternatives: If a product is unavailable, we'll inform you and suggest suitable alternatives.
- Delivery Time Window: Specific delivery times cannot be provided, but we'll aim to deliver on the scheduled date.
- Delivery Tracking: Tracking is not available, but you'll receive email updates on your order status.
- Failed Deliveries and Re-delivery Charges: Ensure someone is available to receive the delivery. Re-delivery charges may apply if delivery fails due to unavailability or inaccurate details.
- Booking Tradespersons/Builders: Schedule tradespersons/builders only after your items have arrived to avoid conflicts or charges.
- Email Communication: Check your junk/spam folders if you don't see our emails. Contact our team for any assistance.
For more in-depth delivery information, please refer to our delivery policy page.
including insulation board and plasterboard